Filter
Top Products
5
Before Using Your Mill & Brew
Coffeemaker
CAUTION: UNPLUG FROM OUTLET
COFFEEMAKER: Clean the decanter and its lid, mill/brew basket
and its lid, and mill/brew assembly. See Care and Cleaning.
Fill the coffeemaker with the maximum amount of water and no
coffee and turn the unit ON. See Brewing. Unplug coffeemaker and
discard the water. Wait 10 minutes to allow heating elements to cool.
Repeat this process one more time.
CAUTION: DO NOT IMMERSE CORD, PLUG OR COFFEEMAKER
BASE IN WATER OR OTHER LIQUID.
CAUTION: BLADES ARE SHARP. DO NOT ATTEMPT TO
DISASSEMBLE MILL & BREW ASSEMBLY.
Setting the Clock
1. Set the clock for actual time of day. Press and hold “HR” button
for 2 seconds. The LED display will flash and unit will enter into
the clock-setting mode. Press “HR” and “MIN”buttons to set
correct time. Small dot in upper left corner of display signifies
A.M. No dot indicates P.M. The clock display will flash
5 times, then stop. The time is now set.
Brewing Instructions
CAUTION: DO NOT FILL MILL/BREW BASKET WITH MORE THAN
8 SPOONS OR 2
1
⁄8 OUNCES OF COFFEE BEANS. ARROW ON
BASKET INDICATES MAXIMUM CAPACITY. DO NOT FILL
MILL/BREW BASKET WITH MORE THAN 8 SPOONS OR 2
3
⁄4
OUNCES OF GROUND COFFEE.
1. Plug into 120V-60 Hz outlet. You do not have to set clock or timer
to brew.
2. Fill decanter with cold water and pour desired number of cups
into water reservoir. Use markings on water window to gauge
level of water required to brew desired number of 5-ounce cups.
The number 10 at the top indicates maximum 10-cup yield.
Replace decanter on warming plate.
3. Open mill/brew assembly lid and grasp mill/brew basket tabs to
remove basket lid. Place 1 measuring spoon roasted whole bean