Filter
Top Products
cally switch off the heating element.
8. If point (7) occurs remove the plug
from the wall socket immediately
and refill the kettle after an adequate
cooling down period, about 15 to 20
seconds.
Warning:
1. DO NOT SUBMERSE IN WATER.
2. Only use the base provided with this
kettle.
3. If the supply cord is damaged it must
be replaced by the manufacturer
or its service agent or a similarly
qualified person in order to avoid a
hazard.
Descaling:
1. Should the appliance switch off
before reaching boiling point this is a
sign that descaling is necessary.
2. A regular descaling agent may be
used. Ensure that the instructions for
use are adhered to. In order to avoid
spillage do not fill the kettle up to
the max mark as the descaling agent
may cause the water to foam.
3. To clean the kettle thoroughly of any
decalcification residues, boil the
kettle several times using clean wa-
ter with each cycle. Rinse the kettle
with clean water afterwards.
Cleaning and care:
1. Before cleaning the appliance, en-
sure that it is disconnected from the
power supply and has cooled down
completely.
2. Do not use abrasives or harsh clean-
ing solutions.
3. Do not immerse the base or the ket-
tle in any liquid. To clean the exterior
use a slightly damp, lint–free cloth.
4. It is advisable to remove lime depos-
its from the kettle at regular intervals.
Specifications:
Supply voltage: 220-240V~ 50Hz
Power consumption: 1850-2200W
Volume: 1.7L
22400_IM.indd 4 2012/05/24 11:21:06 AM