Mellerware 22550 Hot Beverage Maker User Manual


 
and before cleaning.
Allow the appliance to cool completely before
undertaking any cleaning task.
Do not open the lid while water is being boiled
to avoid scalding by hot steam.
If the appliance is filled beyond the “FULL” indi-
cation line, boiling water may be ejected out of
the appliance.
The appliance should be placed on a firm and
flat surface and away from edges to avoid fall-
ing over or off the counter.
Never attempt to move the appliance when it
is full of hot (or cold) water. This appliance be-
comes heavy when filled with water.
Do not boil or heat up any other liquid other
than water in this appliance.
Do not attempt to alter, repair or dismantle the
appliance, it’s power cord or plug. This is dan-
gerous and could cause serious injury. If the
appliance malfunctions, return the appliance to
a technical service centre for repair.
Do not use plug adaptors or extension cords
with this appliance.
Do not insert the appliance’s plug into a socket
with more than one outlet. This is a high power
appliance and could cause the electricity sup-
ply to trip.
This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concern-
ing use of the appliance by a person respon-
sible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
INSTALLATION:
Remove all the packaging materials and tape,
as well as any protective plastic from the appli-
ance, it’s power cord and plug.
Clean off any glue residue left over from the
protective plastic or adhesive tape.
Place the appliance on a flat level surface with
the tap facing the user.
Before connecting the appliance to the power
supply, ensure that the “ON/OFF” switch is set
to the “OFF” position.
HOW TO USE THE APPLIANCE:
The appliance is constructed almost entirely of
stainless steel and should give the user many
years of trouble-free service as long as it is used in
accordance with this instruction manual.
Before using this appliance for the first time, rinse
out the appliance with warm water.
Ensure that the appliance is disconnected from
the wall socket when filling and emptying the in-
ner tank.
Fill the inner tank with water, do not fill the tank
above the “FULL” level indicator. Avoid under fill-
ing the appliance (less than 1L) as this will cause
the “boil dry protection system” to operate and will
reduce the life-span of the element. The “MIN” ca-
pacity is 1 litre.
Ensure that the lid is on correctly and locked into
place. To lock the lid, secure it to the top of the in-
ner tank, then turn the lid clockwise, ensuring that
the guides on the lid handle slot into the guides of
the appliance handle. The lid will lock into place
once it can no longer turn clockwise.
Connect the urn to the power supply by inserting
the plug into the wall socket. Switch the appliance
on and then turn the variable thermostat control
knob to the desired temperature. The heating pilot
light will illuminate and the unit will begin to boil the
water to the selected temperature.
Once the water has been heated to the selected
temperature or has reached boiling point, the heat-
ing pilot light switches off and the keep warm pilot
light illuminates. The urn will automatically switch
over to the keep warm function.
Ensure that the water level is checked regularly to
prevent the appliance from “boiling dry”.
To turn the appliance off, turn the variable tempera-
ture control knob anti-clockwise, switch the ON/
OFF switch to the“OFF” position and remove the
plug from the wall socket.
Slide lid into place.
MW_22550_IM_Dec2011.indd 3 2013/03/04 10:54:33 AM