Mellerware 22550 Hot Beverage Maker User Manual


 
BOIL DRY:
The appliance is fitted with a “boil dry protection
system”, which will switch the appliance off if the
water level is too low.
When “boil dry” occurs, switch the appliance off
and remove the plug from the wall socket and
allow the appliance to cool down.
Fill the urn with water to the desired level. (Mini-
mum capacity is 1L).
Do not fill the inner tank with water above the
“FULL” level indicator.
Insert the plug into the wall socket and switch the
appliance on. The heating pilot light will illumi-
nate and the water will begin to boil.
CLEANING AND MAINTENANCE:
Regular care and maintenance will ensure long and
trouble free operation. In order to ensure proper
cleaning and to avoid causing damage to the ap-
pliance the instructions below should be followed.
Always keep the appliance clean.
This appliance should be cleaned at the end of
each day using warm hot soapy water, then rinse
thoroughly with clean water. Ensure that the ap-
pliance is switched off and has cooled down be-
fore any cleaning task is undertaken.
Using and a damp soft cloth wipe the inside of
the urn so that no residue builds up. Any build-
up of scale deposits can usually be removed by
placing an appropriate solution of vinegar and
water in the inner tank and allowing it to soak
overnight without turning the appliance on. This
should then be followed by the usual cleaning
with warm soapy water followed by rinsing thor-
oughly with clean water.
Wipe down the remainder of the appliance with a
soft damp cloth, taking care to avoid water enter-
ing any part of the appliance.
MW_22550_IM_Dec2011.indd 4 2013/03/04 10:54:33 AM