Filter
Top Products
- Turn the tap of the beer keg to the “Open”
position
- Close the lid (B).
- Do not use this device before operating any type
of machinary or motorised vehicle.
- The beer expiry dates (printed on the keg) must
be adhered to.
- Most kegs will not go “flat”, once opened, for up
30 days (depending on the type of keg).
- To obtain optimum cold temperatures, it is
recommended that the keg is placed in the
refrigerator before use.
- To obtain optimum pressure levels, it is
recommended that the beer is consumed within 5
hours after opening the keg.
- Remember to open the tap on the keg before
using the dispenser nozzle.
Instructions for use
Before use:
- Make sure that all of the product’s packaging
has been removed.
- Ensure that the selected the voltage selector
coincides with the mains.
Use:
- Extend the cable completely before plugging it
in.
- Ensure that the electronic connector is properly
attached to the appliance.
- Connect the appliance to the mains.
- Open the cover
- Insert keg
- Close cover
- Turn the thermostat control to the desired
temperature position.
Practical recommendations:
- To speed up the cooling and start up of the
appliance we recommend you buy previously
cooled kegs of beer, or place your keg in the
refrigerator prior to use in this appliance.
Once you have finished using the appliance:
- Stop the appliance; turn the power control/
switch to the 0 position.
- Unplug the appliance from the mains.
- Remove the keg of beer.
- Close the lid.
- Always clean the appliance after each use.
Cleaning:
- Once the appliance is switched off disconnected
from the mains, allow it to cool before undertaking
any cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use harsh solvents, or products with
an acid or base pH such as bleach, or abrasive
products for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of the
appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
Anomalies and repair:
- Take the appliance to an authorized technical
support service if problems arise. Do not try
to dismantle or repair the appliance yourself,
as this may be dangerous and will render the
manufacturer’s guarantee void.
- If the connection to the mains has been
damaged, it must be replaced and you should
proceed as you would in the case of damage.
Ecology and recyclability of the product:
- The materials of which the packaging of this
appliance consists are recyclable. Should you
wish to dispose of them, use appropriate public
waste containers for each type of material.
- The product does not contain concentrations
of substances that could be considered harmful
to the environment. Should you wish to dispose
of the product once its working life has ended,
take it to an authorised waste collection agent for
recycling.
MW_BDM001_Beer Dispenser_IM.indd 5MW_BDM001_Beer Dispenser_IM.indd 5 2008/07/22 08:46:50 AM2008/07/22 08:46:50 AM