Filter
Top Products
2
INSTALLATION INSTRUCTIONS
Place the SG Series Hot Dog Grill in the most convenient location for ease of cleaning, maintenance and general operation.
When installing this unit, avoid locations with drafts, close proximity to grease or vapor-producing appliances or other high
ambient heat equipment. Allow sufficient overhead clearance for heat dissipation. A minimum of 1” clearance is required
on all sides for proper air circulation.
WARNING
This unit must be used with voltage
As specified on the unit data plate located on
the rear panel. Use of any other voltage,
Or altering plug will damage unit, void
The warranty, and may cause injury.
ELECTRICAL SPECIFICATIONS
The circuit on which the receptacle is installed must be of adequate wiring size and sufficient capacity to meet the
requirements indicated on the unit data plate and in accordance with the National Electrical Code and local
electrical installation codes.
OPERATION INSTRUCTIONS
WARNING
HOT SURFACES ARE PRESENT
USE CAUTION WHILE OPERATING THIS UNIT