Nesco DF-1241 Fryer User Manual


 
6
DF-1241 Deep Fryer
Cleaning Instructions
1. Always unplug appliance, detach the Breakaway Cord
and let oil cool down to room temperature
before cleaning.
2. To remove lid, first open by pressing Lid Button. Then press Lid Release Button on back of fryer housing and lift
lid straight up.
3. Lift out basket.
4. Lift heater assembly from fryer – the control panel requires force to unsnap. Carefully lift out Oil Reservoir by
holding the rim. Pour oil into suitable container.
5. Basket, Lid, and Oil Reservoir are dishwasher safe. Dry parts thoroughly after cleaning.
6. Heater Assembly and Body should never be immersed into water or other liquids. Clean the outer surface of Heater
Assembly and Body with damp cloth, containing mild soap solution or plain water.
7. Ensure that Lid and Oil Reservoir are completely dry after washing and before use. See Illustration for best
draining position of Lid.
8. After cleaning, reassemble Oil Reservoir, Heater Assembly, Basket, and Lid to fryer. The Heater Assembly must be
seated properly into Body or appliance will not operate.
9. For storage, basket handle can be pushed in and folded down to fit inside Reservoir.
Helpful Hints
When cooking foods dipped in fresh batter, lower basket first. Using tongs, add food directly to oil. Use basket to
lift food out when finished cooking.
Fill the basket no more than half full for best results. This helps maintain oil temperature for better cooking
results.
Sort or cut food into uniform pieces. All the food will then be cooked in the same amount of time.
To reduce splattering, remove excess moisture or ice from food.
Store oil in oil reservoir for only a limited time. When oil has cooled to room temperature, pour into a suitable
container with lid and refrigerate.
For best results, change oil in fryer after a maximum of fifteen uses.
65030 MW DF-1241 #66238 10/25/01 2:37 PM Page 6 Sally Mercury:65946 Metalware books:66238: