Filter
Top Products
ii
EC DECLARATION OF CONFORMITY
within the meaning of the EC Machine Directive 2006/42/EC
© 2012
Meyer Sound. All rights reserved.
MTG-1100 Assembly Guide, PN 05.220.030.01 A
The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be con-
strued as a commitment by Meyer Sound Laboratories Inc. Meyer Sound assumes no responsibility or liability for any errors or inaccura-
cies that may appear in this manual. Except as permitted by applicable copyright law, no part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording or otherwise, without prior writ-
ten permission from Meyer Sound.
1100-LFC, GuideALink, and all alpha-numeric designations for Meyer Sound products and accessories are trademarks of Meyer Sound.
Galileo, MAPP Online Pro, Meyer Sound, the Meyer Sound wave logo, and QuickFly are registered trademarks of Meyer Sound Laborato-
ries Inc. (Reg. U.S. Pat. & Tm. Off.). All third-party trademarks mentioned herein are the property of their respective trademark holders.
Product Identification
Product Name / Cat. Number: MRK-1100 Rigging Kit / 40.220.027.01
Product Name / Cat. Number: MTG-1100 Top Grid / 40.220.030.01
Brand: Meyer Sound Laboratories
Batch / Serial Nr: See batch or serial number on item.
For use with 1100-LFC series loudspeaker factory rigging.
Manufacturer
Name: Meyer Sound Laboratories
Address: 2832 San Pablo Avenue
Berkeley, CA 94702-2204, USA
Country: United States of America
Representative: Meyer Sound Laboratories
Authorized Representative/Distributor in Europe
Representative: Meyer Sound Lab. GmbH
Horresser Berg 4A, 56410
Montabaur
Country: Germany
Means of Conformity
Meyer Sound Laboratories declares that the product listed is in conformity with the essential requirements and
provisions of Council Machine Directive 2006/42/EC SAFETY OF MACHINERY by type testing, and conformity
with National standards and technical specifications applied, in particular: EN 292, DIN 18800, BGV C1. Pro-
fessional installation is required per this Assembly Guide.
Signed:
Name: Ms. Margie Garza, Director of Quality
Place and Date: Berkeley, California, USA. October 12, 2012