Filter
Top Products
2
SECTION 1
DESCRIPTION
NOTE
Wiring Diagrams are contained in Section 6 of this Manual
and are also located inside inside the left side control box door.
Additional electrical information is provided on the oven's serial plate.
This Manual Must Be Kept For Future Reference.
PS724 SERIES OVEN SPECIFICATIONS
Conveyor Belt Width 18.00″ (457 mm)
Heating Zone Length 24.00″ (610 mm)
Baking Area Square Feet 3.0 sq. ft. (0.28 m
2
)
Overall Dimension – Standard Single Oven w/Legs - 8″ Exit tray Installed 64.00″ (1625 mm) L ×
36.00″ (914 mm) W ×
43.69″ (1110 mm) H ×
Overall Dimension – Double Oven 64.00″ (1625 mm) L ×
36.00″ (914 mm) W ×
64.00″ (1625 mm) H ×
Overall Dimension – Triple Oven 64.00″ (1626 mm) L ×
36.00″ (914 mm) W ×
69.25″ (1759 mm) H ×
Weight of Single Oven 250 lb (93.3 kg)
Shipping Weight 360 lb (163.3 kg)
Shipping Cube 61.1 ft
3
(1.73 m
3
)
Operating Range 17.4 kW/hr
Maximum Operating Temperature 600°F (316°C)
Warm-up Time 20 min.
Belt Speed Limits 0.30 - 12:00
SERIES PS724 ELECTRICAL SPECIFICATIONS
DOMESTIC OVENS
VOLTAGE PHASE HZ kW WIRING BREAKER POWER POWER
SIZE CORD PLUG
SPECIFICATION
208 3 60 14.4 STD 4-WIRE / L1,L2,L3 & GROUND 50 A 8 GA, 4-WIRE NEMA 15-50P
3 50-60 17.4 OPT 4-WIRE / L1,L2,L3 & GROUND 60 A 6 GA, 4-WIRE NEMA 15-60P
240 3 60 14.4 STD 4-WIRE / L1,L2,L3 & GROUND 50 A 8 GA, 4-WIRE NEMA 15-50P
3 60 17.4 OPT 4-WIRE / L1,L2,L3 & GROUND 60 A 6 GA, 4-WIRE NS
480 3 60 17.4 STD 5-WIRE / L1,L2,L3,N & GROUND 30 A 8 GA, 5-WIRE NS
INTERNATIONAL OVENS
VOLTAGE PHASE HZ kW WIRING BREAKER POWER POWER
SIZE CORD PLUG
SPECIFICATION
208 3 50-60 17.4 OPT 4-WIRE / L1,L2,L3 & GROUND 60 A 6 GA, 4-WIRE - NS NS
3 50-60 14.4 STD 4-WIRE / L1,L2,L3 & GROUND 50 A 8 GA, 4-WIRE - NS NS
230-240 3 50-60 16 / 17.4 OPT 4-WIRE / L1,L2,L3 & GROUND 60 A 6 GA, 4-WIRE - NS NS
3 50-60 13.2 / 14.4 STD 4-WIRE / L1,L2,L3 & GROUND 50 A 8 GA, 4-WIRE - NS NS
380 3 50-60 17.4 STD 5-WIRE / L1,L2,L3,N & GROUND 40 A 10 GA, 4-WIRE - NS NS
400-416 3 50-60 16.1 / 17.4 STD 5-WIRE / L1,L2,L3,N & GROUND 35 A 6 GA, 5-WIRE - NS NS
STD = Standard
OPT = Optional
NS = Not Supplied