Miele 05 620 661 Dishwasher User Manual


 
Drainage system specifications:
The machine comes equipped with:
A 5 ft. long (1.5 m) flexible drain hose
with an internal diameter of
7
/
8
"
(22 mm). Drain hose extensions can
be ordered from Miele’s Technical
Service Department.
A built-in swivel connector allowing
the drain hose to be routed in any
direction.
A built-in mechanical non-return
valve on the discharge side to pre
-
vent waste water from flowing back
into the dishwasher.
A built-in odor trap on the discharge
side to prevent odors from entering
the kitchen.
Maximum drain height: 39" (1 m)
Maximum drain hose length: 12 ft
(3.5 m)
Do not shorten the drain hose.
Do not connect the drain hose to
anything but a genuine Miele hose.
Other hoses may melt or collapse.
Connect the supplied drain hose to the
drain pipe of the kitchen sink either:
above the P trap using the clamp
provided, or
to the dishwasher connector of the
garbage disposal.
When connecting the drain hose to
the garbage disposal, make sure to
remove the knockout from the con-
nection nipple. (See the disposal
manufacturer’s instructions for this
procedure.)
Installation
27