Filter
Top Products
^
Press the START button to start the
programme.
The interior lighting comes on.
A programme can only be started if the
door is closed.
Interrupting or re-starting a
programme
. . . To interrupt a programme:
^
Press the Stop/C button, or open the
appliance door.
The time stops counting down.
. . . To continue the programme:
^ Close the door and press START.
The programme continues.
Altering the settings
If you discover after starting a
programme that . .
. . . the microwave power level is too
high or too low, you can
^
select a new level.
. . . the time set is too short or too long,
you can
^
interrupt the programme (press the
Stop/C button once), use the time
selector to set a new time and
continue the programme (press the
START button).
To cancel a programme
^
Press the Stop/C button twice.
At the end of a programme
An audible tone will sound when the
programme is complete. The interior
lighting of the oven goes out.
^
If you want to stop the audible tone,
press any button.
Automatic warming function
The warming function will switch on
automatically for a maximum of
15 minutes, approx. 2 minutes after the
end of a cooking programme which
used at least 600 watts, providing that
the door remains closed and no buttons
are pressed.
H:H lights up in the display. If the
turntable is engaged it will start turning.
Opening the door or pressing the
Stop/C button while the warming
function is in progress cancels the
function.
The warming function cannot be set as
a separate function.
Operation
25