Filter
Top Products
... it is taking too long for the
contents of the pan to come to the
boil
You can test the power level of the
cooking zone (see "To test the power
level").
... one or more residual heat
indicators are flashing
–
There was an interruption to the
power supply during operation, and
the hob has switched itself off.
The hob can be used again as normal.
Check the cooking stage of the food
and whether its condition has been
affected by the power failure before
switching the cooking zone(s) back on
again.
... the sensor switches are over
sensitive or do not react at all
The sensitivity level of the sensor
switches has changed. It can be
corrected as follows:
–
Make sure that there is no direct light
(from the sun or from an artificial
source) falling onto the hob and that
the surrounding area is not too dark.
–
Make sure that there is nothing
covering the sensor switches or the
hob. Take any pans off the hob and
wipe away any food deposits.
– Interrupt the power supply to the hob
for approx. 1 minute.
Reconnect the hob to the electricity
supply. The electronic unit will reset the
sensitivity levels of the sensor switches.
If this does not solve the problem,
please call the Miele Customer Contact
Centre.
Problem solving guide
32