Filter
Top Products
a1 exhaust connection
for exhaust ducting C 150 mm.
b1 reducing collar
for exhaust ducting C 125 mm.
c1 non-return valve
for fitting into the exhaust connection
(not for recirculation mode).
d2 brackets
to support the appliance in the wall
unit.
e1 spacer strip
to conceal the gap between the rear
of the appliance and the wall.
fConversion kit for recirculation
mode
including exhaust grille and flexible
aluminium hose with clip (this is not
included, but is available as an
optional extra - see Technical Data).
gDML 400 installation kit
(optional accessory)
contains hinging and screws for
fixing a lightshield to match kitchen
furniture (lightshield not supplied with
cooker hood)
14 screws4x15mm
for securing the cooker hood into the
wall unit.
8 screws M4 x 12 mm
for securing the cooker hood to the
brackets.
4 of the screws can be used instead of
the plastic rivets to secure the spacer
strip.
4 plastic rivets
for securing the spacer strip to the
back of the appliance.
Installation
24