Filter
Top Products
^
When fitting an 80 cm or a 90 cm
appliance into a 60 cm unit, unscrew
the brackets on the deflector plate
whilst it is pulled out.
^
Lift the appliance up into the housing
from below, and engage in the
brackets.
Note for dismantling the cooker hood:
Undoing the screws on the left and
right inside the housing releases the
brackets, allowing the appliance to
be removed from the unit.
^ Push the cooker hood back against
the spacer strip.
^ Pull out the deflector plate.
^
Secure the appliance to the brackets
using two screws on each side.
Installation
28