Filter
Top Products
Problem Possible cause Remedy
The Alarm symbol
; flashes.
The temperature inside the
appliance is too low.
–
The door has been
opened too frequently.
–
A large amount of fresh
frood has been put in at
once for freezing without
switching on the Super
freeze function.
–
There has been a lengthy
interruption to the power
supply.
The alarm will stop and the
Alarm symbol ; will go out
when the temperature
reaches the correct level
again.
Depending on the
temperature in the freezer,
you should check the
condition of the food. If food
has defrosted or started to
defrost, check that it is still
safe to use, and if so, use it
as quickly as possible.
Defrosted food may only be
re-frozen after it has been
cooked.
The alarm sounds
and the Power
failure symbol t
flashes in the
display.
The temperature
display will show
the warmest
temperature
recorded in the
freezer during the
power cut.
The temperature has risen
too high at some point
during the last couple of
hours or days because of a
power cut.
Depending on the
temperature in the freezer,
you should check the
condition of the food. If food
has defrosted or started to
defrost, check that it is still
safe to use, and if so, use it
as quickly as possible.
Defrosted food may only be
re-frozen after it has been
cooked.
^
Press the alarm off button.
The warmest recorded
temperature will go out in
the display. The display will
then revert to showing the
current temperature in the
freezer.
F0 to F5 appears in
the display.
There is a fault.
^
Call Miele Service.
Problem solving guide
33