Filter
Top Products
Cleaning and care
23
Changing a halogen lamp
The halogen lamps get very hot
during operation.
They can cause burns even after
being switched off for some time!
Allow them to cool down for a few
minutes before changing them.
Disconnect the cooker hood from the
mains electrical supply before
replacing the lamp.
Remove the grease filters.
Turn the nut anti-clockwise as far as
it will go. The halogen lamp will then
drop down towards you.
Turn the halogen lamp anti-clockwise
and pull it out.
Replace it with a new lamp of the
same type: GU/GZ 10, 230 V, 50W.
Refit the lamp by reversing the steps
shown above. Please observe
manufacturer's instructions.
Replace the grease filters.