Filter
Top Products
Operation (Automatic and Manual modes)
24
Activating and altering the charcoal
filter operating hours counter
Charcoal filters are needed for
recirculation mode.
The operating hours counter for the
charcoal filter needs to be activated
once and the operating hours counter
needs to be set to suit the kind of
cooking you do:
Use the On/Off control to switch
the fan off.
Touch the run-on option control
and the Charcoal filter control at
the same time.
The Charcoal filter symbol and one
of the fan power levels will flash.
Fan power level indicators 1 to IS show
the time set:
1............................................. 120 hours
2............................................. 180 hours
3............................................. 240 hours
IS ........................................ Deactivated
Touch the relevant control to select
the duration required.
Confirm your choice by touching the
Charcoal filter control .
All the indicator lamps will go out.
If you do not confirm within 4 minutes,
the cooker hood will revert to the old
setting.
Reading the filter operating hours
counter
To check the percentage of time set
already used
Touch the On/Off control to switch
the fan on.
Press and hold the Grease filter
control or the Charcoal filter
control .
One or more of the power level
indicators will flash.
The number of fan power level
indicators flashing shows the
percentage of the operating time which
has already been used up.
1 ................................................... 25 %
1 and 2 ......................................... 50 %
1 to 3 ............................................ 75 %
1 to IS ......................................... 100 %
The number of operating hours used
remains in the memory, even when
the appliance is switched off or there
is a power cut.