Filter
Top Products
How it works
An induction coil is located under the
burner. When the burner is switched
on, this coil creates a magnetic field
which impacts directly on the base of
the pan and heats it up. The burner
itself is heated indirectly by the heat
given off by the pan.
This appliance will only work properly
when the wok pan (supplied) is used
(see "Cookware").
The burner will not work:
–
if it is switched on without the wok
pan in place.
– if the wok pan is taken off the burner
when it is switched on.
If this happens, ß will flash in the
display.
If the wok pan is placed on the burner
within 3 minutes, the ß will go out and
you can continue cooking as normal.
If the wok pan is not placed on the
burner, the burner and the combiset will
switch off automatically after 3 minutes.
0 will flash alternately with C in the
display.
To use the burner again as normal, first
turn the control knob to "0".
Be careful not to place cutlery or
other metal objects on the combiset.
When the appliance is switched on,
or when there is residual heat
present, there is the risk of metal
objects heating up quickly.
Beware of burns.
Depending on the material, other
objects left on the combiset could
also melt or catch fire.
Turn the burner off after use.
Induction
10