Filter
Top Products
^
Take hold of the second holder by
pin (c) and pull it upwards and off.
The hoses can now be cleaned with a
brush under running water.
^ Push the brush into both milk pipes
from below. Move the brush in and
out of the pipes as far as it will go
until there are no milk residues left in
them.
Re-assemble the milk pipework as
follows:
^
Fit the holder with the plug into the
cover as shown. Make sure that the
holder fits correctly on the cover.
^
Now push the milk pipes into the
guides (a) and push the spout
holder (b) back on. It should click
into place.
^ Fit the cover with the milk pipes back
into position behind the machine
door.
^ Re-fit the central spout (see "Central
spout").
Cleaning and care
52