Filter
Top Products
a 2 recirculation vents
(recirculation mode only)
b 2 protective shields
prevent scratches to the chimney
during installation.
c 1 protective shield
prevents scratches from the canopy
during installation.
d 1 diverter
(recirculation mode only)
e 1 flex hose for connecting the
diverter to the exhaust connection.
f 2 hose clips for securing the
ducting.
g 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
h 1 non-return flap for vented air
extraction only.
i Upper retaining plate B secures
the chimney extension.
j Middle retaining plate C for
additional stability of the chimney.
k Lower retaining plate A secures
the canopy and motor assembly.
12 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the
packaging are not for use in USA /
CDN.)
2 M 6 locking nuts for securing the
motor assembly.
4 screws 3.9 x 7.5 mm for securing the
chimney and the chimney extension
CAUTION:
During the installation process
please be careful of sharp edges
that can cause harm.
Installation accessories
25