Filter
Top Products
Active charcoal filter
DA 2280 uses 2 active charcoal filters
DA 2210 uses 4 active charcoal filters
In recirculation mode active charcoal
filters must be used in addition to the
grease filters. It is designed to absorb
cooking odors.
The active charcoal filters will be
replaced in the canopy above the
grease filters.
Replacement active charcoal filters
can be ordered from Miele.
^ Remove the grease filters to access
the charcoal filters. See "Cleaning
and Care - Grease filters".
^
Insert the charcoal filters.
Before using:
^
Program the charcoal filter timer, see
"Operation / Reprogramming the
charcoal filter timer".
Replace the active charcoal filters when
the charcoal filter indicator lights, at
least every 6 months or when they no
longer absorb odors efficiently.
^
After replacing the charcoal filters,
press and hold the charcoal filter
button for about 3 seconds to reset
the charcoal filter timer.
The indicator light will go out.
^
If the charcoal filters are replaced
before the timer has reached its
maximum, the charcoal filter button
should be pressed for 6 seconds to
reset the counter to zero.
Cleaning and care
18