Filter
Top Products
Changing lamps
,WARNING TO REDUCE THE
RISK OF ELECTRIC SHOCK
OR INJURY TO PERSONS
OBSERVE THE FOLLOWING:
Disconnect the exhaust hood from
the power supply as follows:
– shut off the circuit breaker at the
house panel, or
– fully unscrew the fuse from the
house fuse panel.
The halogen lights become very hot
when in use. They can cause burns
even after being shut off for some
time.
^
Remove both screws from the lamp
holder decorative ring.
^
Pull the lamp unit out.
^ Push the halogen lamp out of its
mounting from the back. Take care
not to let it fall on the cooktop.
^ Fir a new halogen lamp (20 W) into
the mounting, and replace the lamp
unit, tightening its screws again.
Cleaning and care
14