Filter
Top Products
The movement of the vapour canopy
can be adjusted. This may be
necessary, for instance, if a heavy
cabinet panel is mounted. In the front of
the lower edge of the unit, two
openings (right and left) give access to
two adjustment screws.
^ Remove both cover caps.
^ Using a Philips screwdriver, adjust
both sides evenly:
- clockwise: the folding mechanism
becomes stiffer.
- counterclockwise: the folding
mechanism becomes freer.
^ Replace the cover caps.
Height adjustment
^ Using the screws of the adjustable
brackets, you can align the unit with
the height of the adjoining cabinets.
Turn them
– counterclockwise: The unit is
raised.
– clockwise: the unit is lowered.
^ If necessary, adjust the depth again.
^
Fix the hood to the wall using the
5.2 x 50 mm screws provided.
Installation
22