Filter
Top Products
a 2 protective shields
prevent scratches to the chimney
during installation.
b 2 hose clips for securing the
exhaust ducting.
c 1 reducing collar
for use with a 5" (125 mm) exhaust
ducting.
d 1 non-return flap
e Upper and middle retaining plate
for securing the chimney extension.
f Lower retaining plate for
securing the canopy.
4 screws 5 x 60 mm
4 washers 5.3 mm
6 screws 5 x 40 mm
(The wall anchors included in the
packaging are not for use in
USA/CDN.)
2 M 6 locking nuts for securing the
motor assembly.
4 screws 3.9 x 7.5 mm for securing the
chimney and the chimney extension.
CAUTION:
During the installation process
please be careful of sharp edges
that can cause harm.
Installation accessories
23