Filter
Top Products
Installation
Pull out the snap fittings from the
slots on the left and right hand sides
of the deflector plate (1).
Press the baffle (2) into the engaging
point. Put the snap fittings back in
place.
The snap fitting with the hole must
be inserted on the right.
Do not wipe off any lubricant.
Hold the template supplied against
the back of the lightshield and mark
the drill hole positions for fixing the
hinges.
Only use the template for lightshields
with the following lengths:
DA 262 i DA 272 i Da 292 i
b 598 mm 698 mm 898 mm
c 597 mm 697 mm 897 mm
d 596 mm 696 mm 896 mm
e 595 mm 695 mm 895 mm
f 599 mm 699 mm 899 mm
DA 262 i DA 272 i Da 292 i
b 23 9/16" 27 1/2" 35 3/8"
c 23 1/2" 27 7/16" 35 5/16"
d 23 1/2" 27 7/16" 35 5/16"
e 23 7/16" 27 3/8" 35 1/4"
f 23 9/16" 27 1/2" 35 3/8"
With other lengths adjust the measure-
ments accordingly.
Installation
20