Filter
Top Products
a 3 protective sheets
for use when fitting the tower.
b Upper retaining plate
for securing the extension piece.
c Middle retaining plate
for securing the extension piece.
d 1 exhaust connection for exhaust
ducting C 150 mm.
e 1 reducing collar
for exhaust ducting C 125 mm.
f 1 non-return valve
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode).
5 large headed screws5x40mmand
5xS8plugs
for securing the retaining plates and the
appliance unit.
2 screws5x60mmand
2xS8R60plugs
for securing the appliance unit.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
6 screws 3.5 x 9.5 mm
for securing the canopy and the filter
housing
2 cover caps
1 lever
for changing the halogen lamp and
dismantling the tower
Installation instructions
Installation
29