Filter
Top Products
Set up for recirculation mode
If site conditions are not suitable for the
cooker hood to be used with air
extraction, the appliance must be set
up for recirculation.
For this, a conversion kit DUU 151,
available from your Miele dealer or the
Miele Spare Parts Dept., is required.
^ The non-return flap is not needed for
the recirculation mode. Depending
on model, it may already be fitted.
Pull the non-return flap off the bracket
from vent connection.
You will also need a charcoal filter (see
“Technical data”).
^ Fit the conversion kit as described in
the installation instructions supplied
with the kit.
^
Make sure that the slats on the
exhaust grille are directed towards
the middle of the room, and not
towards the wall or the ceiling.
^
Fit the charcoal filter (see “Cleaning
and care”).
Electrical connection
Refer to the notes in “Electrical
connection” and “Warning and
Safety instructions” before
connecting to the electricity supply.
Installation
31
110
240
90
223
160
33
40
319
143
10
150