Filter
Top Products
Preparing the appliance for use
^
Fill the water container with mains tap water up to at least
the "min" marker. You do not need to remove the insert.
Only use mains tap water. Never use distilled or mineral
water or other liquids.
^
Push the water container into the appliance until it
connects.
If the water container is not positioned correctly, the
appliance will not heat up and after a while F20 will appear in
the display (see "Problem solving guide").
^
Place the food in the oven.
^ Switch on the appliance s.
Setting the temperature and duration
"100 °C" will appear in the display. "°C" will start flashing.
^ If you want to cook with 100 °C, confirm the setting with
"OK".
If necessary, you can reduce the temperature by touching the
? sensor. Confirm with "OK".
After confirming the temperature, 3 zeros will appear in
display and "h" will start flashing.
^
Set the cooking duration you want by touching ; (from
0:00 upwards) or ? (from 9:59 downwards).
^
Confirm your selection by touching "OK".
The appliance will start automatically after the duration has
been confirmed.
If you do not complete these steps within 15 minutes, the
appliance will switch itself off.
Operation
19