Filter
Top Products
Start time / Finish
You can delay the start of a programme. The oven will then
switch on automatically.
With "Start time" you enter the time of day at which you want
the programme to start. With "Finish" you enter the time of day
at which you want the programme to end.
The difference between the Start time and Finish is the
cooking duration selected plus the heating-up time which the
steam oven calculates.
It is only possible to delay the start within 60 seconds after
making an entry. This function cannot be used if the
temperature in the oven is above 40°C, e.g. after a cooking
process.
Cooking results can be impaired if there is a long delay
between the food being placed in the oven and the start of
cooking.
Fresh food can change its colour and even deteriorate.
^ Select the function, temperature and duration in the normal
way.
^ Then select "Start time" or "Finish" and enter the time you
want the cooking programme to begin or end at.
^
Confirm with "OK".
Pre-heat
Your appliance has a pre-heating function. This heats the
oven interior to approx. 40°C. The heating-up time is then
shorter as the oven interior is pre-heated and therefore the
cooking process takes less time.
The appliance is delivered with the pre-heating function
deactivated. If you wish to use it you will need to alter the
setting (see "Settings / Pre-heat").
When the pre-heat function has been activated you can still
choose whether you want to use it for each programme.
Additional functions
32