Filter
Top Products
Before using for the first time
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1
1/2
and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^ Use a thin blunt object (e.g. a pencil)
to press on the light coloured surface
of the On/Off button.
The mains indicator light and the
temperature indicator light will come
on.
The appliance will start cooling.
The temperature indicator light will
remain on until the set temperature has
been reached.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off
^
Press on the light coloured surface of
the On/Off button with a thin, blunt
object.
All the indicator lights will go out and
the cooling system will switch off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^ switch the appliance off,
^ switch off at the wall socket and
withdraw the plug,
^ defrost and clean the appliance out
and
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
12