Miele FN 12420 S Freezer User Manual


 
^ Unscrew upper hinge pin k using
the spanner supplied.
^ Using a screwdriver remove covers
l with a flat-blade screwdriver.
^ Screw in upper hinge pin k on the
opposite side using the spanner
supplied.
^
Refit covers l from the back on the
opposite side, and then click them
into place at the front.
^
Remove caps m from door bearing
bushes in the door and refit on the
opposite side.
^
Using a screwdriver, remove spring
clamp n from underneath the door
and fit it on the opposite side.
^
Press the hinge pin e with the
washer o out of the hinge plate from
below.
Important. The opening on the
washer o must be placed over the
notch on the hinge pin e so that the
washer o sits on the washer of the
hinge plate e.
^ Place the hinge pin e with the
washer o in the door bearing bush
on the opposite side. Important: the
notch on the pin must face the inside
of the door and the groove the
outside.
Changing the door hinging
36