Filter
Top Products
Adjusting the dosage
In order to obtain an optimal cleaning
result you can adjust the dosing
quantity of the rinse aid.
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from0to6.
–
Use a higher setting if spots appear
on dry glassware.
–
Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off "s".
^ Press the "Start / Stop" button and at
the same time turn the dishwasher on
s. Hold the "Start / Stop" button until
the "Start / Stop" indicator comes on.
If it does not come on, start over.
^ Press the program button three
times.
The lowest program indicator flashes
three times in intervals.
The "Cleaning" indicator flashes three
times in intervals.
A rinse aid amount of 3 ml is set by
default.
The amount set can be recognized by
the flashing rhythm of the "Cleaning"
indicator (see table).
Rinse aid
amount in ml
Flashing
rhythm
0–
1 Once
2 Twice
3 Three times
4 Four times
5 Five times
6 Six times
^ Select the desired setting with the
"Start / Stop" button. Every touch of
the button increases the level.
The programmed dosage is saved.
^ Turn the dishwasher off "s".
Before using for the first time
16