Filter
Top Products
Problems water Intake / Drain
Problem Possible fault Solution
The "Intake / Drain"
indicator flashes.
The water supply is
closed.
Open the water supply all
the way.
The dishwasher stops
running.
The "Intake / Drain"
indicator flashes.
Before fixing the fault:
–
Turn the dishwasher off
"s".
Water intake fault.
–
Open the water supply
all the way.
–
Clean the water intake
filter, see "Cleaning
and care".
– The water pressure at
the water connection is
lower than 4.35 psi.
Consult a plumber.
Water drain fault.
There may be water in the
wash cabinet.
– Clean the triple filter.
– Clean the drain pump
and the non-return
valve.
See "Cleaning and care"
for more information on
the above.
–
Remove any kinks in
the drain hose.
Frequently asked questions
34