Filter
Top Products
Installing a freestanding dishwasher
Bow the panel slightly, draw out from
under the control facia and remove.
Shorten the decor frame strips, and
the packing card (if used) by meas-
urement "X".
When using the decor panel sup-
plied: Draw a line to join the two
marks for measurement "X". Shorten
the decor panel along this line.
Note:
When the decor frame strips are short-
ened, the hook at the lower edge is cut
off. It is however only needed for full
length decor frame strips to give addi-
tional fixing to the door outer panel.
Loosen the screws b in the door
outer panel, but do not screw out
completely.
Push the lower edge of the adapter
plate
c (corresponding to measure-
ment "X") upwards far enough for its
lower edge to be in a line with the
lower edge of the adjacent kitchen
unit door front(s).
Tighten the screws b in the adapter
plate.
Installing a freestanding dishwasher
63