Filter
Top Products
Adjust the rear screw feet to the re-
quired height.
Higher = turn clockwise
Lower = turn anti-clockwise
Several turns are needed to adjust 1 mm
in height. A battery-powered screw-
driver could be used.
Adjust the front screw feet manually
or with a flat blade screwdriver.
It is easier to adjust the screw feet if the
weight of the dishwasher is not bearing
down on them.
If possible tip the machine slightly.
For fine adjustments it may be
necessary to press with a screw-
driver against the cogs of the feet.
Screw the feet out until the dishwasher
is right up against the underside of the
worktop, to which it will be screwed
later. Ensure that the dishwasher
stands level.
Installing integrated “i” Dishwashers
70