Filter
Top Products
Filling the salt container
,
Inadvertently filling the salt
container with dishwashing
detergent will damage the water
softener.
,
Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
^ Remove the lower basket and
unscrew the salt container lid.
When opening the salt container,
water will run out. Open the
container only to refill salt.
Important: The salt container must
be filled with 1 quart (1 l) of water
before adding salt for the first
time. Water does not have to be
added with subsequent refills.
^ Place the provided funnel over the
salt container. Carefully fill with salt.
The salt container holds approx.
3.5 lbs (1 kg) of salt. As it is filled,
water will run out.
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
^ If the dishwasher will not be used
immediately, run the "Express"
program (without the Turbo function).
This will remove any traces of salt
from inside the wash cabinet.
Salt indicator
^ When the "Salt" indicator comes on, refill
the salt after the program has finished.
After the container has been filled, the
water softener is automatically
reactivated the next time the dishwasher
is started. The "Salt" indicator will be lit
during this process. It will go out once
the reactivation process is complete.
The "Salt" indicator will not light if the dish-
washer had been programmed for a water
hardness of below 4 °d (4 gr/gal [US]).
Before using for the first time
13