Filter
Top Products
Problems water intake/drain
Problem Possible fault Solution
The "Intake / Drain"
indicator is flashing.
The water supply is
shut off.
Open the water supply all the
way.
The dishwasher
stops.
The "Intake / Drain"
indicator flashes.
The time display
shows FXX.
Before fixing the fault:
–
Turn the dishwasher off "s".
Fault F12/F13: Water
intake fault.
–
Open the water supply all the
way.
–
Clean the water intake filter,
see "User Maintenance
Instructions".
–
The water pressure at the
water connection is lower than
4.35 psi. Consult a plumber.
Fault F11: Water drain
fault. There may be
water in the wash
cabinet.
– Clean the triple filter.
– Clean the drain pump and the
non-return valve.
See "User Maintenance
Instructions".
– Remove any kinks in the drain
hose.
Frequently asked questions
35