Filter
Top Products
Problem Possible fault Solution
Dishes are not dry,
glasses and cutlery
are spotted.
The rinse aid setting may be
too low, or the rinse aid
reservoir is empty.
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Dishes were taken out too
soon.
Leave dishes in longer, see
"Use".
A "Tab" product was used.
These products have a low
drying effect.
Set the Detergent setting for
a normal detergent and add
rinse aid.
The "Tab" option is turned
on, but a normal product
was used.
Set the Detergent setting to
the detergent used, see
"Additional options - Tab".
White residue is
visible on cutlery
and dishes.
Clouding occurs on
glassware and film
can be wiped off.
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
Unsuitable "Tab" products
were used.
Change detergent, use
normal tabs or normal
powder detergent.
The salt container is empty
(depending on model).
Refill the salt container, see
"Before using for the first
time".
The salt container lid was
not correctly screwed on
(depending on model).
Reseat the lid making sure ir
screws back on correctly.
Frequently asked questions
40