Filter
Top Products
With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem Possible fault Solution
The Start/Stop indicator
does not flash after the
dishwasher was turned
on "s".
The machine is not
plugged in.
Insert the plug.
The fuse has tripped. Reset the circuit breaker.
See data plate for
minimum amperage.
The dishwasher stops
during a program.
The fuse has tripped. Reset the circuit breaker.
See data plate for
minimum amperage.
The program cycle
indicators "Rinse",
"Drying" and "End"
flash simultaneously.
The time display shows
FXX.
There may be a technical
fault.
– Turn the dishwasher off
"s".
After a few seconds:
– Turn the dishwasher
on.
–
Select the desired
program with the
program button.
–
Press the "Start/Stop"
button.
If the problem persists
contact Technical
Service.
The drain pump is
running when the door
is open.
Fault F70:
The waterproof system
has activated.
–
Turn off the water
supply.
–
Contact Miele
Technical Service.
Frequently asked questions
35