Filter
Top Products
Button tone
A tone will sound when a button is
pressed.
The volume can be set to seventeen
different levels. It is set to level 8 by
default.
^
Select the desired setting and
confirm with "OK".
Brightness
The display brightness can be adjusted
in 17 levels.
The brightness is set to level 9 by
default.
^ Select the desired brightness and
confirm with "OK".
Contrast
The display contrast can be adjusted in
17 levels.
The contrast is set to level 9 by default.
^
Select the desired contrast and
confirm with "OK".
Memory V
The memory function allows you to save
the last selected program.
When turning the dishwasher off and on
again after a program has finished or
opening and closing the door, the last
selected program is displayed instead
of the main menu.
The function is turned on by default.
^
Select the desired option and confirm
with "OK".
RemoteVision
(Optional accessory.
To learn more about RemoteVision
visit www.miele.com.)
^ Select e to show module state.
If "K module connected and ready" is
displayed, no further action is required.
Via the "Options" menu you can:
–
Reboot the module
–
Reset the factory default settings
–
Enter Ad-Hoc mode
Refer to the "RemoteVision" section
of this manual or the RemoteVision
Installation manual for further
instructions.
Settings J
45