Filter
Top Products
At the end of a program
When the program has finished the
"End" indicator lights.
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open
the door slightly. The dishes will cool
much faster.
^ Unload the dishwasher.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^ Turn the dishwasher off s.
The dishwasher continues to use
electricity until turned off with the
s button.
^
If the dishwasher is not used for a
longer period of time,
e.g. vacationing, turn off the water
supply.
Preparing your appliance for
an extended vacation
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
enough to reduce the risk of a leak.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
Interrupting a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
,
Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Changing a program
If the detergent flap is already open
do not change the program.
If a program has already started and
you wish to change it:
^
Press the "Start/Stop" button for at
least one second.
The program is canceled. The
"Start/Stop" indicator lights.
^
Select and start the desired program.
Use
27