Filter
Top Products
Turning on
^
Open the water supply, if closed.
^
Open the door.
^
Make sure the spray arms can rotate
freely.
^
Turn the dishwasher on "g".
The "g" indicator lights up.
Selecting and starting a
program
Choose your program according to the
type of load and soiling. See the
"Program Guide" for more information.
^
Select the desired program with the
"Program" button.
The program indicator of the selected
program lights.
^
Start the program by closing the
door.
Cancel a program only in the first
few minutes. Otherwise important
program steps may be interrupted.
Standby
A few minutes after the last key is
pressed or at the end of the program
the dishwasher will switch into Standby
mode to save energy. The display is
turned off and only the U indicator lights
up.
^
To turn the display back on press the
program button.
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will switch into Standby
mode.
Use
26