Filter
Top Products
With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem Possible fault Solution
The program does
not start.
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse is defective or
the breaker has tripped.
Reset the circuit breaker.
See data plate for minimum
amperage.
The dishwasher is not
turned on.
Turn the dishwasher on "g" and
select a program.
The dishwasher
stops during a
program.
The fuse has tripped. Reset the circuit breaker.
See data plate for minimum
amperage.
The buzzer sounds.
All program
indicators are
flashing fast when
the door is open.
There may be a technical
fault.
Turn the dishwasher off "o".
After a few seconds:
–
Turn the dishwasher on.
–
Select the desired program
with the program button.
–
Close the door.
If the problem persists contact
Technical Service.
The drain pump is
running when the
door is opened.
The waterproof system
has activated.
–
Turn off the water supply.
–
Contact Miele Technical
Service.
Frequently asked questions
31