Miele G 4286 Dishwasher User Manual


 
Faults in the water intake or water drain
Problem Possible fault Solution
The dishwasher
stops shortly after
the program starts.
The buzzer sounds.
The Intake/Drain
indicator light
alternates between
flashing and
remaining steady
when the door is
open.
The water supply
is closed.
Open the water supply all the way.
The dishwasher
has stopped.
The buzzer sounds.
The Intake/Drain
indicator light
flashes when the
door is open.
The time display
shows fault FXX.
Before fixing the fault:
Press the K button to turn the
dishwasher off.
Fault F12/F13:
Water intake fault.
Open the water supply all the way.
Clean the screen in the water
supply valve (see User
"Maintenance instructions).
The water pressure at the water
connection is less than 4.35 psi.
Consult a plumber.
Fault F11:
Water drainage
fault.
There might be
water in the wash
cabinet.
Clean the triple filter (see "Cleaning
and care").
Clean the drain pump (see "User
maintenance instructions").
Clean the non-return valve (see
"User maintenance instructions").
Remove any kinks or high loops in
the drain hose.
Frequently Asked Questions
38