Filter
Top Products
Problem Possible fault Solution
Dishes are not dry,
orglasses and
cutlery are spotty.
The rinse aid dosage is set
too low or the rinse aid
reservoir is empty.
Refill the reservoir, increase
the dosage, or switch the
rinse aid product when
refilling (see "Rinse aid").
Dishes were taken out too
soon.
Leave the dishes in longer
(see "Use").
You used a multi-function
detergent with too little
drying power.
Switch to another detergent
or add rinse aid (see "Rinse
aid").
White residue is
visible on the
dishware.
Clouding occurs
on glassware and
cutlery; the
deposit can be
wiped off.
The rinse aid dosage is too
low.
Increase the dosage (see
"Setting the rinse aid
dosage").
You used an unsuitable
multi-function detergent.
Switch to another detergent.
Use a normal Tab product or
a normal powder detergent.
Frequently Asked Questions
42