Miele G 5500 Dishwasher User Manual


 
Delay start
The start time of a program can be
delayed from 30 minutes to 24 hours.
The delay is set in 30 minute
increments.
When using the "Delay Start"
function, make sure that the
detergent compartment is dry before
adding detergent. Wipe dry with a
cloth if necessary. Otherwise the
detergent could stick together and
not completely rinse out.
Do not use liquid detergent. The
detergent could leak out of the
compartment.
^ Press the K button to turn the
dishwasher on.
The "Start / Stop" indicator light flashes.
^ Select the desired program with the
"Program" button.
^ Press the "Delay start" button.
The last delay start time will show in the
time display. The "Delay start" indicator
light comes on.
^
Set the desired delay start time with
the "Delay start" button.
If you press and hold the "Delay start"
button, the time will automatically count
up to
24:00 h. To start again at 30
minutes, press the "Delay start" button
twice.
^
Press the "Start / Stop" button.
The "Start / Stop" indicator light comes
on.
If, after you have set the delay start
time, you do not press the Start / Stop
button within a few seconds, the
display will revert to showing the
program duration. You will have to enter
the delay start time again.
The time will count down to the
program start in 1-minute steps.
Once the delay start time has elapsed,
the selected program starts. The
display shows the remaining time, the
indicator "Delay start" goes out and the
"Start / Stop" indicator light comes on.
,
To prevent children from coming
into contact with the detergent:
Only add detergent just before
starting the program, i. e. before you
press the Start / Stop button, and
lock the door with the child safety
lock.
Starting a program before the Delay
start has elapsed:
A program can be started before the
Delay start time has elapsed.
^
Press the "Start / Stop" button for at
least one second.
The "Delay start" indicator light goes out
and the "Start / Stop" indicator light
flashes.
^
Press the "Start / Stop" button again.
The program starts. The "Start / Stop"
indicator light comes on.
Additional options
39