Filter
Top Products
Rinse aid
For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0-6 ml.
The factory default dosage setting is
3 ml rinse aid.
The amount of rinse aid dispensed can
be more than the value set due to the
automatic adjustment of the "Sensor
Wash" program.
If spots appear on the dishes:
–
Use a higher setting for rinse aid.
If smearing or streaking show:
– Use a lower setting for rinse aid.
^ Select the desired rinse aid amount
and confirm with the center button.
Buzzer
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
Buzzer at the end of a program
The buzzer at the end of a program
sounds four times in intervals with a
brief break in between. The buzzer
sounds if the dishwasher has not been
turned off.
The buzzer at the end of a program is
turned off by default.
Buzzer in case of a fault
In the event of a fault, the buzzer
sounds continuously.
The fault buzzer cannot be turned
off.
Buzzer volume
There are seven different volume
settings. If no volume level is selected,
the buzzer is deactivated.
^
Select the desired volume and
confirm with the center button.
Settings menu
43