Filter
Top Products
Optimize standby
A few minutes after the last key is
pressed or at the end of the program
the dishwasher will turn off to save
energy. The display and the indicators
are turned off and only the K Start/Stop
indicator light flashes slowly.
If you do not turn the dishwasher off
after the program ends, it will turn
completely off after a few minutes in
Standby mode.
This function can also be turned off.
The display and the indicators stay on
and the dishwasher will turn off after
approx. 6 hours.
^ Select the desired setting and press
the center button.
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will go into Standby
mode.
The refill messages can be turned
off when you use a tab detergent
(see "Before using for the first time").
Fault messages cannot be turned
off.
Deactivate indicators
If you consistently use "Tab" detergent
products in your dishwasher, you can
switch the Salt and Rinse Aid indicators
off if desired.
^
Select the desired setting and
confirm with the center button.
If you switch to using a detergent
that does not contain salt or rinse
aid, remember to replenish the salt
and rinse aid and turn the indicators
back on.
Settings menu
44