Filter
Top Products
Pre-rinse
You can use this function in the
selected program to remove easily
loosened food residues. It is not
available for every program.
^
Select the desired setting and
confirm with the center button.
Once set, the function will remain active
for the programs for which it is
available, until the setting is changed.
Extended drying
The fan runs longer at the end of a
program to improve the drying result.
This function is not available for every
program.
^ Select the desired setting and
confirm with the center button.
Once set, the function will remain active
for the programs for which it is
available, until the setting is changed.
Brightness
There are seven different display
brightness settings.
^
Select the desired brightness and
confirm with the center button.
Contrast
There are seven different display
contrast settings.
^
Select the desired contrast and
confirm with the center button.
Filter check
This selection allows you to set the
number of cycles run before the filter
check message shows.
You can select between 30 and 60
cycles.
The "Filter check" message is set by
default to 50 cycles.
^ Select the desired interval and
confirm with the center button.
Settings menu
46