Filter
Top Products
Securing pieces
To ensure stability, the dishwasher must
be fixed securely to the worktop (step 6).
Two securing pieces are supplied for
this purpose.
^ Fit the securing pieces into the slots
on both the left and right hand sides.
Granite and marble worktops
:
With these worktops the dishwasher
must be securely screwed to
neighbouring units on the right and left
hand sides. For this you will require two
special fixing brackets (these are
included in the accessory pack
together with fitting instructions and
screws).
Angle connector
The angle connector for the water
drainage hose at the rear of the
dishwasher can be turned.
^
Turn the angle connector in the
direction of the on-site connection for
the drainage hose.
^ Push the dishwasher right back into
the recess. Ensure that the drain
hose, inlet hose and the electric
cable are laid to reach the
connection point without any kinks.
Installing integrated "i" Dishwashers
11